Features

Recovery Tow Point to suit Toyota Prado 150, FJ Cruiser, 4Runner (Gen 5) & Lexus GX 460

If you've done your homework, you'll know that our recovery point is a little unconventional. Not only does it secure to the standard mounting locations, but it also takes up a third point: the factory tie-down point. This trio gives our point a unique advantage.  

Whilst strong, the standard two mounting points are vulnerable to a peeling type of force during less-than-ideal recoveries. The addition of our third mounting location on a second plane shares loads more evenly and results in an incredibly robust point with superior performance. Utilising this second plane also allows us to leverage the design for a horizontal opening, allowing for greater clearances and approach angles, and we all know just how important that is when heading off-road.  

 

FEATURES:

  • Soft shackle friendly, with a large opening and rounded edges.
  • Low profile and specifically designed to suit the Prado/FJ/4Runner chassis, for optimum approach/departure angles.
  • 20mm thick Australian Made Steel, Billet CNC Machined.
  • Designed to safely manage stresses generated during an angled recovery.
  • A textured powder-coat finish in Tanami Desert Red or Aramac Desert Grey is both hardwearing and looks great. 
  • Tested and rated to a Working Load Limit (WLL) of 5000kg. 
  • Supplied with grade 10.9 high tensile bolts. 

 

COMPATIBILITY:

Compatible with the following Prado 150 & FJ Cruiser Bull Bars:

  • No Bar / Factory Bumper 
  • Genuine Toyota (Alloy & Commercial)
  • ARB (Note: Trimming of splash guard is required to clear the opening for shackles)
  • TJM
  • XROX
  • AFN (Note: Some trimming of splash guard required)

For the list of incompatible bars, see our product FAQ. 

 

INCLUDES:

To suit the Toyota Prado 150, FJ Cruiser, 4Runner Gen 5 & Lexus GX 460:

  • 2 x Recovery Tow Points – Select Aramac Grey or Undara Red above
  • All the hardware you'll need to complete install, including grade 10.9 high-tensile bolts and Nord-Lock washers

 

Australian Designed, Made and Owned.

 

This product is proudly certified as Australian Made & Owned.

When you choose Australian-Made, you're not only selecting a high-quality product designed for our tough conditions; you're supporting a network of Australian businesses and families. Your choice provides local jobs and training, helping us in our mission to ensure Australia continues to push boundaries in design, innovation and manufacturing.

FAQ

How does the recovery point mount to the Prado 150 vs the FJ Cruiser?

 

Both vehicles use the same lower chassis mounting point, and then each takes up a slightly different hole for top mounting, as pictured below. They then take up a third point, which is unique to our points and gives them a big advantage in recovery situations. 
 
Prado 150 top chassis mounting point
FJ Cruiser top chassis mounting point

 

Is the Recovery Point compatible with the Prado 120?

We believe the point may be compatible with later Prado 120 models, however we have been unable to confirm this yet.

What Bull Bars is this compatible with?

We have confirmed compatibility with the following Prado 150 & FJ Cruiser Bull Bars:

  • No Bar / Factory Bumper 
  • Genuine Toyota (Alloy & Commercial)
  • ARB (Some trimming of splash guard may be required)
  • TJM
  • XROX
  • AFN (Some trimming of splash guard required)

 

What Bull Bars is this NOT compatible with?

We have confirmed that our Recovery Tow point is NOT compatible with:

  • ECB (East Coast Bullbars)

Let's Answer Your Questions

 

Both vehicles use the same lower chassis mounting point, and then each takes up a slightly different hole for top mounting, as pictured below. They then take up a third point, which is unique to our points and gives them a big advantage in recovery situations. 
 
Prado 150 top chassis mounting point
FJ Cruiser top chassis mounting point

 

We believe the point may be compatible with later Prado 120 models, however we have been unable to confirm this yet.

We have confirmed compatibility with the following Prado 150 & FJ Cruiser Bull Bars:

  • No Bar / Factory Bumper 
  • Genuine Toyota (Alloy & Commercial)
  • ARB (Some trimming of splash guard may be required)
  • TJM
  • XROX
  • AFN (Some trimming of splash guard required)

 

We have confirmed that our Recovery Tow point is NOT compatible with:

  • ECB (East Coast Bullbars)
Video Guide
Product Overview
Specifications
SKU KS0551
Brand KAON
Shipping Weight 7.2000kg
Shipping Width 0.150m
Shipping Height 0.140m
Shipping Length 0.385m
Shipping Cubic 0.008085000m3
Returns & Warranty

We know that sometimes, things don’t go to plan and that you might need to return something for many reasons.

Returns help us better understand our products, and how we can improve them, as well as providing us with a chance to understand your needs as a customer better. Ultimately, they help us in our pursuit of constant improvement and innovation. 

 

Our Returns Policy

We offer a 30-day return policy for change of mind.

Return shipping costs are non‐refundable for change of mind. 

For more information, visit our Returns page.

Our Warranty

We warrant our products for a period of 3 years and unlimited kms from the date of purchase.

Exceptions include Transmission Oil Coolers and Underbody Water tanks which are warranted for 2 years. For full details see our Warranty page.

Reviews

Related Products