If you’re the proud owner of a Prado, you probably already know that the rear door is prone to sagging over time. This eventually causes the striker to no longer line up, and the sound the door makes when being closed is enough to make anyone cringe.
Often fixing the rear door is something that a lot of folks put off, because it means changing the entire hinge. We get it. It’s a big task, and it can get a little costly. So, we’ve come up with a remedy – it’s not a long term fix, but it should see you get a few more solid years out of the door before needing to do a bigger repair. And it’s a perfect project to tackle while at home: inexpensive, quick, and ohhh-sooo-satisfying.
Introducing our Shims. These guys have been mainstays on our bestsellers list from the day we released them, and it doesn’t look like they’re letting up anytime soon. They’re installed in the lower hinge, which helps lift the door and correct the sag.
It’s as easy as 1. Loosen lower hinge bolts, 2. Lift the door, 3. Slide in the Shim/s, 4. Drop the door and tighten. You can see more here.
We know what some of you may be thinking: you could achieve the same result with some washers. But that would require removing the entire bolt, trying to line up a washer and bolt, while lifting the door... and we’re all about working smarter not harder around here.
We sell them in sets of two, which we find is enough for most people. If your door has only just begun to sag a single shim should do you for now, and you can always add a second later.
Compatible with: Toyota Prado 150, 120 & FJ Cruiser – and fun fact, we just learned they work with the Land Rover Discovery 2, too.
Running non-factory tyres, rims, or offset and finding that your Spare Tyre is rubbing on the rear door?
In the spirit of keeping things simple, this one is as easy as taking the wheel off, placing the spacer over the bolts, and putting the wheel back on again.
You can purchase a single 6mm spacer, which is all you need to 265/70/16 (32"). Those running a bigger size opt for two spacers, which will give you 12mm – and is generally more than enough to cater to most.
It really is a two minute install this one, but if you think we’re exaggerating – here’s the video:
Compatible with: Toyota Prado 150, 120 & FJ Cruiser, and other models with a 6 X 139.7 PCD Stud Pattern.
Another project that is perfect for a weekend at home is the Reversing Camera Relocation Bracket.
If you’re a fan of running a rear bin bag or other spare-tyre-mounted accessories, the bracket gives you the best of both worlds, allowing easy relocation of the factory camera.
We also think it provides a better view of your tow ball. Your camera will be in a different position, so your on-screen guidelines will not be correct – but at least you can hitch up without an argument. We nicknamed it the 'marriage saver' in the workshop.
Curious to see whether it’s the kind of project you want to tackle? It’s super simple, with no wiring modifications or extensions required. Watch our installation guide here:
Compatible with: Toyota Prado 150. Just make sure you select the correct model bracket – there are 2 options depending on whether your model is pre- or post-facelift.
Get started – find the bracket here.
Reverse camera relocation bracket
By: Ross on 22 June 2024I would love to see a reverse camera relocation bracket to suit the camera being relocated to the underside of a roof rack like the rhino platform. This would not only give a better overview of surroundings when reversing off-road but also when parking. It would be completely out of the way, as your current bracket might make it possible to be hit or covered by mud, rocks but also by accidentally hitting the camera when unloading or packing up. My suggestion is a bracket to be designed so that the camera can be mounted centre or off-centre on the underside of a rhino platform. Regards Ross
Pleasantly surprised
By: Dave Sheppard on 21 April 2022Hi, I’ve been in the automotive industry for just on 38 years. In that time I’ve fitted a lot of accessories both genuine and non genuine. Today I fitted one of your cargo barriers to our Prado. Firstly, I’m amazed that there is something still available that’s owned and made in Australia such as your product and I would say without a doubt, this product is of a standard I’ve not seen for a very long time. Easy to fit, all quality fittings and finishes, just brilliant. For the first time since I can remember, I put a product sticker on my vehicle and it was yours. I’ll be singing your praises for a long time, so we’ll done team KAON, we will certainly be back!!! Cheers Dave
KAON 4x4 Touring Accessories Response
Thanks so much for the kind words Dave. The team works hard to create high-quality gear that we feel is genuinely useful, durable and easy to install, so it's incredibly rewarding to hear when customers experience this first-hand. Safe travels, and hope we can help you out again in the future.
Found yourself off-track? Our team is on hand to help you get unstuck.
Add your favourites to cart
Select Afterpay at checkout
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
