Out-Back Maxtrax LITE Mount
Product Code: KS0782
Out-Back Maxtrax LITE Mount
Product Code: KS0782
In Stock
Quantity:
Shipping CalculatorFor more information on our delivery options, see our Shipping page.
Download Fitting InstructionsOut-Back™ Maxtrax LITE Mount to suit Rear-Mounted Spare Tyres
Create a way to mount your Maxtrax LITE Boards, Out-Back.
First, pick your mounting base: the Out-Back™ Spare Tyre Mount or Out-Back™ Spare Wheel Hub Mount. You can choose to run it centre, left, right or even above your spare tyre.
Then, bolt on your Out-Back™ Maxtrax LITE mount. Adjust it up and down, in and out, or flip it around — it's totally up to you.
FEATURES:
- The flexible Out-Back™ mounting system allows you to choose where you mount your boards, depending on your setup and vehicle.
- Multiple mounting holes and offset design provide maximum adjustability.
- You can choose from the Spare Tyre Mount, which allows you to still run a rear bin bag or factory reversing camera, or the Wheel Centre Hub Mounting, which bolts directly to the back, or simply purchase the Maxtrax Mount for another DIY use!
- Rear Spare mounting provides an accessible height, great for mobility issues or those without room on their roof.
- Lightweight but strong aluminium design provides a secure surface for mounting.
- Compatible with Maxtrax LITE Boards.
- The base mounts are also multipurpose, with nearly unlimited uses, perfect for 10L water or fuel storage with a Rotopax Style holder.
- Powder coated in a durable textured matt black finish that will blend in with your tyre and won’t rust.
COMPATIBILITY:
Please see the FAQ for full compatibility details, including common vehicle configurations.
Not compatible with factory wheel covers.
INCLUDES:
- 1 x Out-Back™ Maxtrax LITE Mount
PLUS, select your preferred base mount:
- 1 x Out-Back™ Spare Tyre Mount OR 1 x Out-Back™ Spare Wheel Hub Mount
- Each includes everything you'll need to install the mount.
Australian Designed, Made and Owned.
For full dimensions, load ratings, and other important details for this product, see the Product FAQ tab.
This product is proudly certified as Australian Made & Owned.
When you choose Australian-Made, you're not only selecting a high-quality product designed for our tough conditions; you're supporting a network of Australian businesses and families. Your choice provides local jobs and training, helping us in our mission to ensure Australia continues to push boundaries in design, innovation and manufacturing.
What vehicles is the Out-Back™ Mount compatible with?
The Out-Back™ mount compatibility is as follows.
.png)
Please note that the Out-Back™ range is not compatible with factory spare wheel covers, such as those found on the Prado and Pajero.
What clearance is required for the Out-Back™ Maxtrax & Spare Tyre Mount to be used?
170mm of clearance is required from the edge of the tyre at the centre point, in order to mount the Out-Back™ Maxtrax & Spare Tyre Mount. This clearance needs to be maintained when the tyre is in all positions, i.e. when the door or rear bar is both closed and open. See the product listing images for more details.
Due to this clearance, the Out-Back™ Maxtrax & Spare Tyre Mounts are not compatible with side mounting with some Barn-door models, as the pins either block entry to the passenger side door handle or cannot open fully without fouling on the driver's side taillight.
How many Maxtrax LITE can the mount hold?
When used with the Maxtrax Pins, this mount gives you the ability to mount 2 or 4 Maxtrax LITE recovery boards.
Can I use two Out-Back™ mounts simultaneously?
Yes, two mounts can be used simultaneously, just be mindful of the mount spacing, as well as overall weight loading on both the rear door and the ratchet strap.
Which mounting pins are best for my setup?
There are different pin options depending on which recovery boards you have. For Maxtrax LITE: Maxtrax 17mm pins
What is the Out-Back Spare Wheel Hub Mount rated to?
The mount is rated to hold up to 17kg.
The Out-Back™ mount compatibility is as follows.
Please note that the Out-Back™ range is not compatible with factory spare wheel covers, such as those found on the Prado and Pajero.
170mm of clearance is required from the edge of the tyre at the centre point, in order to mount the Out-Back™ Maxtrax & Spare Tyre Mount. This clearance needs to be maintained when the tyre is in all positions, i.e. when the door or rear bar is both closed and open. See the product listing images for more details.
Due to this clearance, the Out-Back™ Maxtrax & Spare Tyre Mounts are not compatible with side mounting with some Barn-door models, as the pins either block entry to the passenger side door handle or cannot open fully without fouling on the driver's side taillight.
When used with the Maxtrax Pins, this mount gives you the ability to mount 2 or 4 Maxtrax LITE recovery boards.
Yes, two mounts can be used simultaneously, just be mindful of the mount spacing, as well as overall weight loading on both the rear door and the ratchet strap.
There are different pin options depending on which recovery boards you have. For Maxtrax LITE: Maxtrax 17mm pins
The mount is rated to hold up to 17kg.
| SKU | KS0782 |
We know that sometimes, things don’t go to plan and that you might need to return something for many reasons.
Returns help us better understand our products, and how we can improve them, as well as providing us with a chance to understand your needs as a customer better. Ultimately, they help us in our pursuit of constant improvement and innovation.
Our Returns Policy
We offer a 30-day return policy for change of mind.
Return shipping costs are non‐refundable for change of mind.
For more information, visit our Returns page.
Our Warranty
We warrant our products for a period of 3 years and unlimited kms from the date of purchase.
Exceptions include Transmission Oil Coolers and Underbody Water tanks which are warranted for 2 years. For full details see our Warranty page.
